Local Data Search
 
USA.com / Cytec Engineered Materials Inc

Cytec Engineered Materials Inc

 

501 West 3rd Street
Winona MN, 55987
Winona County
View Full EPA Profile

Create Date: 2000-03-01
Facility Site Type: Stationary

Environmental Interest Types:

AIR MAJOR:A Clean Air Act Stationary Source Major discharger of air pollutants according to the Alabama power decision's definition of a major source or the 1993 EPA Compliance Monitoring Branch Classification Guidance. A facility is classified as a Major Discharger if: * Actual or potential emissions are above the applicable major source thresholds, or * Actual or potential controlled emissions > 100 tons/year as per Alabama power decision, or * Unregulated pollutant actual or potential controlled emissions > 100 tons/year as per Alabama power decision.
AIR SYNTHETIC MINOR:A facility is classified as a Clean Air Act Stationary Source Synthetic Minor discharger of air pollutants if: * Potential emissions are below all applicable major source thresholds if and only if the source complies with federally enforceable regulations or limitations, or * Actual emissions < 100 tons/year, but potential uncontrolled emissions > 100 tons/year, or * Unregulated pollutant actual emissions < 100 tons/year.
CRITERIA AND HAZARDOUS AIR POLLUTANT INVENTORY:A national inventory of emissions data of both hazardous air pollutants (HAPs) and criteria air pollutants. Criteria air pollutants include ozone, carbon monoxide, nitrogen oxides, sulfur oxides, lead, and fine particulate matter and HAPs, or air toxics, are defined in section 112(b) of the 1990 clean air act amendments.
HAZARDOUS WASTE BIENNIAL REPORTER:Under the authority of Sections 3002 and 3004 of the Resource Conservation and Recovery Act of 1976 (RCRA), as amended by the Hazardous and Solid Waste Amendments of 1984 (HSWA), hazardous waste generators and treatment, storage, and disposal facilities are required to report to the EPA or the authorized States, at least every two years, the quantities, nature, and disposition of hazardous waste.
ICIS-NPDES NON-MAJOR:A Clean Water Act (CWA) National Pollutant Discharge Elimination System (NPDES) discharger of pollutants into waters of the United States that is not designated as a major is considered a non-major.
LQG:Hazardous Waste Large Quantity Generators (LQGs) generate: * 1,000 kg or more of hazardous waste during any calendar month; or * More than 1 kg of acutely hazardous waste during any calendar month; or * More than 100 kg of any residue or contaminated soil, waste or other debris resulting from the cleanup of a spill, into or on any land or water, of acutely hazardous waste during any calendar month; or * 1 kg or less of acutely hazardous waste during any calendar month, and accumulate more than 1 kg of acutely hazardous waste at any time; or * 100 kg or less of any residue or contaminated soil, waste or other debris resulting from the cleanup of a spill, into or on any land or water, of acutely hazardous waste during any calendar month, and accumulated more than 100 kg of that material at any time.
OSHA ESTABLISHMENT:
STATE MASTER:A state registry system that maintains basic identification information for a facility site, including the state master identifier, geographic address, affiliated organizations and contacts, industrial classifications, and linkages to environmental permits and programs.
TRI REPORTER:A Toxic Release Inventory Reporter is a facility which: * Employs the equivalent of 10 or more full-time employees; and * Is included in Standard Industrial Classification (SIC) codes 10xx, 12xx, 20xx-39xx, 4911, 4931, 4939, 4953, 5169, 5171, or 7389; and * Manufactures (defined to include importing), processes, or otherwise uses any Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313 chemical in quantities greater than the established threshold in the course of a calendar year (i.e., manufactures or processes over 25,000 pounds of the approximately 600 designated chemicals or 28 chemical categories specified in the regulations, or uses more than 10,000 pounds of any designated chemical or category).

NAICS Code:

313320:Fabric Coating Mills
325211:Plastics Material and Resin Manufacturing

SIC Code:

2295:Coated Fabrics, Not Rubberized
2821:Plastics Materials, Synthetic Resins, and Nonvulcanizable Elastomers
3081:Unsupported Plastics Film And Sheet

Popular Rankings
Fastest / Slowest Growing Cities in MN
Fastest / Slowest Growing States in U.S.
Best / Worst Cities in MN by % of Males Employed
Best / Worst States in U.S. by % of Males Employed
Best / Worst Cities in MN by % of Females Employed
Best / Worst States in U.S. by % of Females Employed
Best / Worst Cities by Crime Rate in MN
Best / Worst States by Crime Rate in U.S.
Richest / Poorest Cities by Income in MN
Richest / Poorest States by Income in U.S.
Most Expensive / Cheapest Homes by City in MN
Most Expensive / Cheapest Homes by State in U.S.
Most / Least Educated Cities in MN
Most / Least Educated States in U.S.
 
The USA.com website and domain are privately owned and are not operated by or affiliated with any government or municipal authority.
© 2025 World Media Group, LLC.